Application: Ensure the surface to be treated is clean and as dry as possible, application to a damp surface is possible; do not apply onto any previously painted or solvent based Water Seal treated surface.
Apply 2 coats with a good external brush or roller
The second coat should be applied within 1 hour of the first.
Coverage: Approximately 4 SqMtrs/Litre/Coat – depending on the porosity of the surface.
Drying Times: 2 hours – depending on the absorbency of the substrate.
Clean Equipment: with warm soapy water.
Thompson`s Water Seal Clear
Thompson’s Water Seal utilises hydrophobic technology to deliver invisible protection against water damage.
The deep penetrating formulation travels deep into exterior dry porous surfaces to form a breathable membrane that allows moisture vapour inside the substrate to evaporate whilst protecting against water penetration and damage.
Thompson’s Water Seal has a unique formulation which, unlike some waterproofers, penetrates the surface therefore waterproofing even after the initial beading is gone. It will not be destroyed by ultraviolet light and is long lasting even under heavy moisture conditions.
Assuming application instructions and coverage guidelines are adhered to, it provides effective water repellency for years.
Suitable for use on brick, concrete and stone. For exterior use only.
No account yet?
Create an Account
Reviews
There are no reviews yet.